Preset Timing Modes - Samsung SH37F User Manual

Preset Timing Modes

― This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Using a
resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution
specified for your product.
― Check the frequency when you exchange a CDT product (connected to a PC) for an LCD product. If the LCD product does not support 85Hz, change the
vertical frequency to 60Hz using the CDT product before you exchange it with the LCD product.
Model Name
Synchronization Horizontal Frequency
Vertical Frequency
Resolution Optimum resolution
Maximum resolution
The screen will automatically be adjusted if a signal that belongs to the following standard signal modes is transmitted from your PC. If the signal
transmitted from the PC does not belong to the standard signal modes, the screen may be blank with the power LED on. In such a case, change the settings
according to the following table by referring to the graphics card user manual.
Resolution Horizontal Frequency
(kHz)
IBM, 720 x 400 31.469
MAC, 640 x 480 35.000
MAC, 832 x 624 49.726
MAC, 1152 x 870 68.681
VESA, 640 x 480 31.469
VESA, 640 x 480 37.861
VESA, 640 x 480 37.500
SH37F
26 - 81 kHz
50 - 75 Hz
1920 x 540 @ 60 Hz
1920 x 1080 @ 60 Hz
Vertical Frequency Pixel Clock
(Hz) (MHz)
70.087 28.322
66.667 30.240
74.551 57.284
75.062 100.000
59.940 25.175
72.809 31.500
75.000 31.500
Sync Polarity
(H/V)
-/+
-/-
-/-
-/-
-/-
-/-
-/-
153