Basic Controls - Panasonic TH-50PH30E Operating Instructions Manual

High definition plasma display
Hide thumbs Also See for TH-50PH30E:
Table of Contents

Advertisement

Basic Controls

Main Unit
Remote control sensor
Main Power On / Off Switch
Power Indicator
The Power Indicator will light.
• Power-OFF .... Indicator not illuminated (The unit
will still consume some power
as long as the power cord is still
inserted into the wall outlet.)
• Standby ........ Red
• Power-ON ...... Green
• PC Power management (DPMS)
.........................Orange (With PC input signal.)
• DVI-D Power management
.........................Orange (With DVI input signal.)
• No activity power off
.........................Red
When this function is set to "Enable", the power is turned off (standby) automatically when there
is no operation of the Plasma Display for 4 hours.
Starting from 3 minutes before the turn off, the remaining time will be displayed.
12
INPUT
MENU
-/
VOL
Volume Adjustment
Volume Up "+" Down "–"
When the menu screen is
displayed:
"+" : press to move the cursor up
"–" : press to move the cursor down
(see page 14)
Enter / Aspect button
(see page 14)
+
/
ENTER/
MENU Screen ON / OFF
Each time the MENU button is pressed, the menu
screen will switch. (see page 14)
Normal Viewing
Sound
Pos./Size
INPUT button
(INPUT signal selection)
(see page 11)
Picture
Setup
Press any key to abort.
No activity power off 3min

Advertisement

Table of Contents
loading

Table of Contents