Advertisement
28
English
2
1
1
2
3 Turn the retaining rings anticlockwise and
remove them. Place them aside in a safe place.
4 Remove the shaving heads from the shaving
head holder.
Throw away the used shaving heads
immediately to avoid mixing them with the new
shaving heads.
5 Place the new shaving heads in the shaving
head holder.
Note: Make sure the notches on both sides of the
shaving heads fit exactly onto the projections in
the shaving head holder.
6 Place the retaining rings back onto the shaving
heads and turn them clockwise to reattach the
retaining ring.
-
Each retaining ring has two recesses that fit
exactly into the projections of the shaving head
holder. Turn the ring clockwise until your hear a
click to indicate that the ring is fixed.
Advertisement
