Table of Contents
Advertisement
Scanner Tab
On the Scanner tab, you can specify the following settings.
Sound Settings
You can set the machine to play music at the end of a scan.
Select the Play Sound When Scanning is Completed checkbox, then click Browse... and specify a
sound file.
You can specify the following files.
• MIDI file (*.mid, *.midi)
• Audio file (*.wav, *.aif, *.aiff)
• MP3 file (*.mp3)
Calibration Settings
Platen Calibration
When you click Execute, calibration starts and the scanner will be adjusted to reproduce correct
color tones in scanned images. Perform calibration when the color tones in the preview image are
significantly different from the original item or when colors appear in white areas.
Execute at Every Scan
When you set to ON, the scanner will be calibrated every time before previewing and scanning, to
reproduce correct color tones in scanned images.
Note
• Even when Execute at Every Scan is set to OFF, the scanner may be calibrated
automatically in some cases (such as immediately after you turn the machine on).
Note
• Calibration may take time depending on your computer.
Test Scanner...
Opens the Scanner Diagnostics dialog from which you can run the scanner performance test. Click
Start to start the diagnostics.
178
Advertisement
Table of Contents
