Adjusting The Throttle Cable Free Play - Yamaha BANSHEE YFZ350W Owner's Manual

1
2
3
(b) (a)
4
5
6
1. Throttle stop screw
7
Engine idling speed:
1450–1550 r/min
8
ECB00510
9
CAUTION:
G
The throttle stop screws were preset at the
10
factory. When adjusting the idling speed,
turn both throttle stop screws the same
11
amount, otherwise the carburetor synchroni-
zation will be incorrect.
G
Adjusting the pilot air screws and the idling
speed are separate procedures, but they
must be adjusted at the same time to achieve
1
(a)
(b)
optimum engine performance.
NOTE:
If the specified idling speed cannot be obtained as
described above, have a Yamaha dealer make the
adjustment.
7. Install the seat.
EBU24043

Adjusting the throttle cable free play

The throttle cable free play should be checked
and, if necessary, adjusted at the intervals speci-
fied in the periodic maintenance and lubrication
chart.
The throttle cable free play should measure 4.0–
6.0 mm (0.16–0.24 in) at the throttle lever. Period-
ically check the throttle cable free play and, if nec-
essary, adjust it as follows.
NOTE:
The engine idling speed must be checked, and ad-
justed if necessary, before adjusting the throttle ca-
ble free play.
1. Loosen the locknut.
2. To increase the throttle cable free play, turn
the adjusting bolt in direction (a). To decrease
8-30