1010 Bottom Cover - Lenovo E470 Hardware Maintenance Manual

1010 Bottom cover

Removal steps of the bottom cover
Remove the screws 1 , and then remove the bottom cover
Step Screw (quantity)
1
M2 × 6.5 mm, flat-head, nylon-coated (3)
Applying labels to the bottom cover
The new bottom cover FRU is shipped with a kit containing labels of several kinds. Apply those labels when
you replace the bottom cover. For the labels that are not shipped with the new bottom cover, peel them off
from the old bottom cover, and adhere them to the new one.
2 .
Color
Black
.
Chapter 9 Removing or replacing a FRU
Torque
0.294 Nm
(3.0 kgf-cm)
65