Table of Contents
Advertisement
Setting
Sleep Mode
Sleep Mode Timer
Illumination
Trigger Out
High Altitude Mode
Note: If you select Anamorphic Wide as the Trigger Out setting, voltage is only output from the Trigger
out port when the Aspect setting is set to Anamorphic Wide or Horiz. Squeeze.
Note: The Reset setting does not reset the Memory, Projection, High Altitude Mode, Standby Mode
or Language settings.
Parent topic:
Adjusting the Menu Settings
Related concepts
Projection Modes
Related references
Available Image Aspect Ratios
Related tasks
Using the Home Screen
Adjusting the Color Convergence (Panel Alignment)
Using Picture in Picture
Selecting External Network Detection Settings
Description
Automatically places the projector in standby mode after an
interval of inactivity
Sets the time before the projector automatically turns off (Sleep
Mode must be turned on)
Turns off the status light on the projector
Outputs a DC 12V signal from the 3.5 mm mini-jack Trigger
Out port whenever the projector is turned on
Regulates the projector's operating temperature at altitudes
above 4921 feet (1500 m)
100
Advertisement
Table of Contents
