Samsung MX-D730D User Manual page 35

Tuner/External Source
` "RECORDING" is displayed.
5.
To stop recording, press the STOP (
and then automatically create and save as the
MP3 file.
`
After the recording, a directory named
"RECORDING"(CD), "CD COPY"(MP3 CD/USB),
"TUNER RECORDING" or "AUX RECORDING", will
be created in your device.
✎
NOTE
Do not disconnect the USB or the AC Cord during
`
the recording as this may cause file damage.
` If you disconnected USB device during the
recording, the main unit will be power off and
you may not delete the recorded file, In this case,
please connect the USB device to the PC and
backup the USB data on the PC first and then
format the USB device.
` When the USB memory is not enough, it will be
displayed "NOT ENOUGH MEMORY".
` The recording works if the USB device or the HDD
is formatted in the FAT file system. (The NTFS file
system is not supported.)
` When you use CD high speed search function, the
CD recording can't work.
` Sometimes, the recording time may be longer with
some USB devices. (See page 8)
` When the CD recording, the EQ and GIGA
SOUND functions can not work and automatically
change to OFF.
` When the CD recording, the REPEAT function can
not work and automatically switches to OFF.
` If you use the MIC function during the CD recording, the
voice from the microphone will be recorded.
You can not record the radio when searching or
`
no available frequencies in the Tuner mode.
` Note that setting the input level too loud when
recording music from an external device through
the AUX and USB channel may cause noise into
the recording. In that case, lower the external
device's volume level.
To delete a file
You can delete a file on your USB device.
1. Play a file you want to delete.
2. Press the
@ ) button
3.
Press [
To cancel the selection, press the RETURN button on
the main unit.
4. Press the ENTER button.
The selected file will be deleted.
✎
NOTE
The NTFS file system is not supported.
Recording Speed
1. Each time you press and hold the
SPEED button on the remote control or press
the REC SPEED button on the main unit, the
recording speed will change as following:
`
While the Tuner or External Source is recording,
the recording speed does not supported.
`
When you select RECORDING x 3, the audio
sound will not be output.
DELETE button on the main unit.
_+
] on the remote control to select YES.
RECORDING x 1 RECORDING x 3

English
CD REC
35