9.
Loop blade control cable around the two roller
guides and hook the end into the hole in the idler
arm on the mower (Fig. 46).
1
2
Figure 46
1. Blade control cable
2. Idler arm
10. Move the height-of-cut lever (deck lift) into the
"D" notch to make it easier to install the
height-of-cut lift assist spring.
3
3. Roller guides
11. Hook the height-of-cut lift assist spring onto the
retaining bolt (Fig. 47), using the spring tool
provided with the machine.
1
3
Figure 47
1. Spring
2. Bolt
12. Check side-to-side blade level; refer to
Side-to-Side Mower Leveling, page 39.
Maintenance
2
3. Spring tool
37