Adjusting The Clutch Free Play - Yamaha BIG BEAR 250 YFM25BZ Owner's Manual

The brake light switch for the brake pedal can be
adjusted as follows, but the other brake light
switches should be adjusted by a Yamaha dealer.
1. Remove the footboard. (See "Engine oil" on
page 8-11 for removal and installation proce-
dures.)
2. Turn the adjusting nut while holding the brake
light switch in place. To make the brake light
come on earlier, turn the adjusting nut in direc-
tion (a). To make the brake light come on lat-
er, turn the adjusting nut in direction (b).
1. Brake light switch
2. Rear brake light switch adjusting nut
3. Install the footboard.
EBU24803

Adjusting the clutch free play

The clutch free play must be adjusted periodically.
Adjust the free play as follows.
1. Remove the footboard. (See "Engine oil" on
page 8-11 for removal and installation proce-
dures.)
2. Loosen the locknut.
3. Slowly turn the clutch adjusting screw in direc-
tion (a) until resistance is felt, and then turn it
1/8 turn in direction (b).
1. Locknut
2. Clutch adjusting screw
8-34
8