Toro 51563 Operator's Manual page 5

3. Install the vacuum bag.
4. Adjust the strap as needed for comfortable operation.
3
Converting from Vacuum to
Blower
Parts needed for this procedure:
1 Blower tube
1 Inlet cover
Procedure
1. Remove the vacuum bag and the vacuum tube from the
blower housing.
2. Install the blower tube and then the inlet cover onto the
blower housing.
Important: The blower should not run unless the
bottom inlet cover is locked in place.
Note: Note: If the blower runs without the inlet cover
in place, do not use the blower. Return it to a Toro
service dealer.
5