Table of Contents
Advertisement
Using the headset
Optimal usage conditions
To ensure you get the best performance from the headset:
• D o not block or create a barrier between the devices. Human body can interfere with the
Bluetooth signal.
• D o not touch the transmitting/receiving part of the connected device.
• W hen pairing the headset with other devices, place the devices close together.
Depending on the user environment, noise problem or malfunction might occur.
• B luetooth uses the same frequency as low power devices, such as industrial, scientific,
medical devices, electronic devices or wireless LANs. Move the headset away from these
devices, as they may interfere with each other.
• T o improve range, use the headset in places without intervening obstacles. Obstacles
such as walls, corners or furniture weaken the signal.
• W hen calling through the headset, sound quality might drop, as the distance from
the connected mobile device increases. If two devices are too far from each other, the
connection is lost and the call is transferred to the mobile device.
• C onversation might be interrupted when calling in a loud environment, such as outside
or where there is a lot of background noise.
Some devices, especially those that are not tested or approved by Bluetooth SIG, may
not be compatible with the headset.
Pairing and connecting the headset
When using a new mobile device, you need to pair it with the headset. Once pairing is
complete, the headset attempts to reconnect each time you turn it on. For Pairing and while
in use, the two devices must be placed close together.
Option 1: Manual pairing
1
With the headset turned on, press and hold the Talk button for 3 seconds to enter Pairing
mode. The indicator light flashes blue and red for 3 minutes.
2
Activate Bluetooth on the mobile device, scan for the device, and then select the headset
name "EO-MN910" from the list of available devices. For more details, refer to the mobile
device's user manual.
9
Advertisement
Table of Contents
