Table of Contents
Advertisement
sensor will cause the corresponding indicator to flash slowly.
For example, the front left indicator corresponds to the front left
cooking zone.
The next active cooking zone is selected by touching the
burner select
or
Use the
2.
amount of time, for example, 15
minutes, after which the cooking zone
will
automatically switch itself off.
The safety shutoff is now activated.
To display the time remaining for any
of the cooking zones,
corresponding cooking zone's key.
The corresponding control indicator will begin to blink slowly.
The settings are reset using the (
period of time has elapsed, the cooking zone automatically
switches itself off.
Dot(.) symbol will flash on the right side of power level
during safety shutoff timer.
To make the settings more quickly, touch any of the
control selectors
To cancel the timer setting,touch the
selectors
cooking zone
The timer display will show
Countdown timer
For the countdown timer to be used, the appliance must be
switched on but all the cooking zones do not be selected.
1. Touch the Timer control
will appear in the timer display.
2. Set the desired period of time using the Timer setting selectors
(
or
).
The countdown timer function is now activated and the
remaining time appears in the timer display.
To adjust the remaining time, touch the Timer control
and change the setting using the Timer setting selectors (
32_ hob use
will appear in the timer display.
sensor again.
to set the desired
touch the
until the desired value is reached.
simultaneity after
and the
Timer control
sensor.
or
). After the
and
select the corresponding
sensor.
set
or
control
sensor.
or
).
2012-11-20
Advertisement
Table of Contents
