Panasonic VIERA TH-L32XM5A Operating Instructions Manual page 26

Menu Item
Bass
Treble
Equaliser
Balance
Surround
Auto Gain Control
Volume Correction
Speaker Distance to
Wall
MPX
SPDIF Selection
MPEG Optical Level
HDMI 1 / 2 Input(HDMI)
SPDIF Delay
26
TH-L32XM5A_EN.indb 26 TH-L32XM5A_EN.indb 26
Adjustments / Configurations (alternatives)
Adjusts level to enhance or minimise lower, deeper sound output
Adjusts level to enhance or minimise sharper, higher sound output
Adjusts the frequency level to suit your favourite sound quality
●
This function is available when [Mode] is set to [User].
● Select the frequency and change the frequency level by using the cursor button.
● To enhance the bass sound, raise the level of the lower frequency. To enhance
the treble sound, raise the level of the higher frequency.
● To reset the levels of each frequency to the default settings, select [Reset to
Defaults] by using the cursor button, and then press the OK button.
Adjusts volume level of right and left speakers
Surround sound settings [Off] / [On]
●
Switching is also possible by the SURROUND button on the remote control
(p. 9).
Automatically regulates large sound level differences between channels and
inputs [Off] / [On]
Adjusts the volume of individual channel or input mode
Compensates for the low frequency sound due to the distance between the
speakers and the wall [Over 30cm] / [Up to 30cm]
●
If the back space between the TV and wall is over 30 cm, [Over 30cm] is
recommended.
●
If the back space between the TV and wall is within 30 cm, [Up to 30cm] is
recommended.
Selects multiplex sound mode (if available)
[Stereo] : Use this normally
[Mono] : When stereo signal cannot be received
[M1] / [M2] : Available while mono signal is transmitted
●
For Analogue mode
SPDIF : A standard audio transfer file format
Selects the initial setting for digital audio output signal from DIGITAL AUDIO OUT
and HDMI2 (ARC function) terminals [Off] / [Dolby digital] / [PCM]
[Dolby digital]: Dolby Digital and HE-AAC multi-channel are output as Dolby
Digital Bitstream. MPEG is output as PCM.
[PCM]: Digital output signal is fixed to PCM.
●
ARC (Audio Return Channel) : A function of digital audio output using HDMI
cable
Adjusts the audio level output from DIGITAL AUDIO OUT terminal as the initial
setting [-12] / [-10] / [-8] / [-6] / [-4] / [-2] / [0] (dB)
●
Normally, PCM sound is larger comparing with the other types of audio track.
Selects to fit the input signal [Digital] / [Analogue] (p. 44)
[Digital]: When sound is carried via the HDMI cable connection
[Analogue]: When sound is not carried via the HDMI-DVI adaptor cable
connection
●
For HDMI input
Adjusts the delay time of the sound output from DIGITAL AUDIO OUT and
HDMI2 (ARC function) terminals if the sound does not synchronise the image
7/27/2012 5:18:08 PM 7/27/2012 5:18:08 PM