Do you have a question about the CPT-180 and is the answer not in the manual?
Questions and answers
Jane Yates
February 15, 2025
brand new toaster and when depressing lever most of the time will not sstay down
1 comments:
Mr. Anderson
February 15, 2025
The lever on the right side of the Cuisinart CPT-180 toaster won't stay down because the latch mechanism is not engaging properly. To fix this, the toaster needs to be disassembled by removing the screws on the bottom and taking off the top shell. This will allow access to the internal components to troubleshoot and repair the latch issue.
Page 2
INSTRUCTION BOOKLET Metal Classic 4-Slice Toaster CPT-180 For your safety and continued enjoyment of this product, always read the instruction book carefully before using.
9. Do not let cord hang over the edge of the table or countertop or touch hot surfaces. 10. Do not place toaster on or near a hot gas or electric burner or in a heated oven. 11. Do not use this toaster for other than intended use.
INTRODUCTION Cuisinart raises the bar on toasters with a dynamic new look and extra convenient features. Your Metal Classic 4-Slice Toaster is streamlined, smooth brushed stainless steel that looks great on any kitchen counter. Two separate sets of controls perfectly toast two types of breads, bagels, or muffins at once.
USE AND CARE Unwind the power cord. Check that the crumb tray is in place and that there is nothing in the toaster slot. Plug power cord into the wall outlet. 1. Insert Slice(s) of Bread. Be sure that multiple slices do not overlap and that the carriage is in the up position.
3. Press the "Bagel" button. Red LED indicates feature is activated. To stop cycle: When the bagel cycle is complete, the toaster will raise the bread. If you wish to stop the cycle before it is finished, simply press the cancel button to interrupt.
California law provides that for In-Warranty Service, California residents have the option of returning a nonconforming product (A) to the store where it was purchased or (B) to another retail store which sells Cuisinart products of the same type. The retail store shall then decide to either repair...
Need help?
Do you have a question about the CPT-180 and is the answer not in the manual?
Questions and answers
brand new toaster and when depressing lever most of the time will not sstay down
The lever on the right side of the Cuisinart CPT-180 toaster won't stay down because the latch mechanism is not engaging properly. To fix this, the toaster needs to be disassembled by removing the screws on the bottom and taking off the top shell. This will allow access to the internal components to troubleshoot and repair the latch issue.
This answer is automatically generated