Sharp PN-425 Operation Manual page 19

nDimensional Drawings
Note that the values shown are approximate values.
When mounting the monitor, be sure to use a wall-mount/ceiling-mount bracket they comply with the VESA-compatible
mounting method. SHARP recommends using M6 screws and tighten the screws.
Loose holding may cause the product to fall, resulting in serious personal injuries as well as damage to the product. The
screw and hole should come together with 3/8 inch (10 mm) length of thread. Use the bracket which applied UL1678
standard, and which can endure at least 4 times or more the weight of the monitor.
nCompatible signal timing (PC)
Screen resolution
VESA 640 × 480
800 × 600
848 × 480
1024 × 768
1280 × 768
1360 × 768
Wide
1280 × 720
US TEXT 720 × 400
Sun 1024 × 768
* All are compliant only with non-interlaced.
* Depending on the connected PC, images may not be displayed properly even if the compatible signal described above is input.
* The frequency values for the Sun are reference values.
40-1/4 [1023]
Opening width (36-13/16 [934.8])
Hsync Vsync Dot frequency
31.5kHz 60Hz 25.175MHz
37.9kHz 72Hz 31.5MHz
37.5kHz 75Hz 31.5MHz
35.1kHz 56Hz 36.0MHz
37.9kHz 60Hz 40.0MHz
48.1kHz 72Hz 50.0MHz
46.9kHz 75Hz 49.5MHz
31.0kHz 60Hz 33.75MHz
48.4kHz 60Hz 65.0MHz
56.5kHz 70Hz 75.0MHz
75Hz 78.75MHz
60.0kHz
47.8kHz 60Hz 79.5MHz
60.3kHz 75Hz 102.25MHz
47.7kHz 60Hz 85.5MHz
44.7kHz 60Hz 74.4MHz
31.5kHz 70Hz 28.3MHz
48.3kHz 60Hz 64.13MHz
53.6kHz 66Hz 70.4MHz
56.6kHz 70Hz 74.25MHz
Specifications
Unit: inch [mm]
7-7/8 [200] 7-7/8 [200]
3-15/16 [100] 3-15/16 [100]
Screw holes for mounting brackets
(M6 x 12 holes)
Analog Digital
Yes Yes
Yes Yes
Yes
Yes
Yes -
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes -
-
Yes
Yes -
17
E