Install Firmware - Panasonic PT-52LCX16 Installation Instruction

6

Install Firmware

CAUTIONS:
• Do not turn the TV OFF or press any buttons on the TV while the firmware
update is in progress.
• Do not remove the SD Card from the SD Card Slot during the firmware update
process.
1) Power the TV ON.
2) Insert the SD Card with the firmware update into the SD Card Slot on the front of the
TV under the Front Panel Door.
3) Perform the actions requested on the TV screen until a message indicating the firmware
update is complete, then:
• Remove the SD Card from the TV's SD Card Slot.
• Power the TV off.
CAUTION: Do not perform the following steps until AFTER the Lamp Cooling Fan
has stopped.
• Unplug the power cord from the electrical outlet for at least 30 seconds.
• Re-plug the power cord into the electrical outlet.
• Power the TV ON.
CAUTION: Do not power the TV off or press any buttons if an initializing or
updating message is displayed.
4) Complete the FIRST TIME
• Select the Language.
• Set the Clock.
• Program the Channels.
LCX16 / LCX66 Series Projection LCD TV Tuner Firmware Installation Instructions
SETUP.
Page 11 of 11