Installing The Power-Switch Board; Removing The Speaker Module - Dell Vostro 24-5460 Owner's Manual

Installing the Power-Switch Board

1. Connect the power-switch cable to the power-switch board.
2. Insert the power-switch board into its slot and secure it.
3. Install:
a. back cover
b. stand
4. Follow the procedures in

Removing the Speaker module

1. Follow the procedures in
2. Remove:
a. stand
b. back cover
3. To release the speaker module:
a. Remove the screws that secure the speaker cover to the computer [1].
b. Pry the edges of the speaker cover to release it from the tabs [2].
After Working Inside Your
Before Working Inside Your
Computer.
Computer.
15