Table of Contents
Advertisement
Repeat Step 4 to select and check
51
additional desired item.
To remove the desired item from the
61
list, press the yELLoW (C) button
again.
The check on the desired item is
removed.
When done, press the
tooLS button
71
and then select the Copy to uSB using
the ▲▼ buttons. and then press the
v button. The Copy to USB pop-up
appears.
81
Use the ▲▼ buttons to select the
device to store the copied files, and
then press the v button.
✎
NotES
Do not disconnect the device while
■
copying is in progress.
If you want to cancel copying, press
91
the v button and then select yes.
Select No to continue copying.
When copying is complete, the
111
"Copying completed." message
appears. Press the v button to go
back to the Playback screen.
✎
NotES
This function may not be supported
■
by some discs.
On the Copying screen, you can
■
also choose Select All and deselect
All1
-
Use
Select All to select all item.
This cancels your individual item
selections.
-
Use
deselect All to deselect all
selected item at once.
Playing Photo Contents
You can control the playback of photo
content located on a Blu-ray disc, DVD,
CD, USB device, or your computer.
using the tools Menu
During playback, press the tooLS button.
Start Slide
Select to start or stop the
Show/ Stop
slide show.
Slide Show
Select to set a slide show's
Slide Show
speed.
Speed
Select to listen to music
Background
while viewing a slide
Music
show.
Select to enlarge the
current picture. (Enlarge
Zoom
up to 4 times)
Select to rotate the picture.
(This will rotate the picture
Rotate
either clockwise or counter
clockwise.)
Shows the picture information.
Information
✎
NotES
Depending on the disc or storage
■
device, the Tools menu may differ.
To enable the background music
■
function, the photo file must be
in the same storage media as the
music file.
However, the sound quality can be
affected by the bit rate of the MP3
file, the size of the photo, and the
encoding method.
You can't enlarge the subtitle and
■
PG graphic in the full screen mode.
Appendix
Troubleshooting
Before requesting service, please try the following solutions.
PROBLEM
No operation can be
Check the batteries in the remote control. They may need replacing.
●
performed with the
Operate the remote control at a distance of no more than
●
remote control.
6.1m from the player.
Remove batteries and hold down one or more buttons
●
for several minutes to drain the microprocessor inside the
remote control to reset it. Reinstall batteries and try to
operate the remote control again.
Disc does not play.
Ensure that the disc is installed with the label side facing up.
●
Check the region number of the Blu-ray Disc/DVD.
●
Disc Menu does not
Ensure that the disc has disc menus.
●
appear.
The prohibition
This message appears when an invalid button is pressed.
●
message appears on
The Blu-ray Disc/DVD's software doesn't support the
●
the screen.
feature (e.g., angles).
You've requested a title or chapter number or search time
●
that is out of range.
Play mode differs from the
Some of the functions selected in the Setup Menu may not work
●
Setup Menu selection.
properly if the disc is not encoded with the corresponding function.
The screen ratio
The Screen Ratio is fixed on your Blu-ray Disc/DVD.
●
cannot be changed.
This is not a problem with the player.
●
No audio.
Make sure you have selected the correct Digital Output in
●
the Audio Options Menu.
The screen is blank.
If the HDMI output is set to a resolution your TV cannot support
●
(for example, 1080p), you may not see a picture on your TV.
Press the
●
seconds with no disc inside. All settings will revert to the
factory settings.
When the factory default settings are restored, all stored
●
user BD data is deleted.
SOLUTION
^
button (on front panel) for more than 5
21
Advertisement
Table of Contents
