Cancelling The Programme; Machine Is In Rinse Hold Mode - Beko WMB 81241LS User Manual

To activate the Child Lock:
C
Same phrase will appear on the display if you press any button when Child Lock is enabled.
To deactivate the Child Lock:
C
Do not forget to disable the child lock at the end of the programme if it was enabled before.
Otherwise, machine will not allow to select a new programme.

4.6.18 Cancelling the programme

C
If you want to open the loading door after you have cancelled the programme but it is not
possible to open the loading door since the water level in the machine is above the loading
door opening, then turn the Programme Selection knob to Pump+Spin programme and
discharge the water in the machine.

4.6.19 Machine is in Rinse Hold mode

Spin symbol flashes and Pause symbol illuminates when the machine is in Rinse Hold
mode.
If you want to spin your laundry when the machine is in this mode:
Adjust the spin speed and press Start / Pause / Cancel button. Pause symbol disappears
and Start symbol appears. Programme resumes, discharges the water and spins the
laundry.
If you only want to drain the water without spinning:
Just press Start / Pause / Cancel button. Pause symbol disappears. Start symbol appears.
Programme resumes and discharges the water only.
35 / EN
Press and hold 2nd and 4th Auxiliary Function buttons
for 3 seconds. "Con" appears on the display.
Press and hold 2nd and 4th Auxiliary Function buttons
for 3 seconds. "COFF" appears on the display.
Press and hold Start / Pause / Cancel button for 3
seconds. Start symbol flashes. Symbol of the step at
which the programme was cancelled remains lit. „End"
appears on the display and the programme is cancelled.
Washing Machine / User's Manual