Care And Maintenance - Sharp FP-FM40B Operation Manual

CARE AND MAINTENANCE

To maintain optimum performance of this air purifi er, please clean the unit including the fi lter
periodically.
Be sure to disconnect the power cord from the wall outlet before performing any maintenance.
UNIT
Pre-fi lter
NOTE
SENSOR
OM_FP-FM40B_TH-EN.indb Sec1:12 OM_FP-FM40B_TH-EN.indb Sec1:12
Wipe with a dry, soft cloth
For stubborn stains or dirt, use a soft cloth dampened with warm water.
CAUTION
•Do not use volatile fl uids
Benzine, paint thinner, polishing powder, etc. , may damage the surface.
•Do not use detergents
Detergent ingredients may damage the unit.
Gently remove dust from the back panel, using a
vacuum cleaner attachment or similar tool.
Pre-fi lter
CAUTION
Do not apply excessive pressure, when
scrubbing the pre-fi lter.
How to clean hard to remove dirt
Pre-fi lter
1. Remove the Catch Panel.
2. Remove the Pre-fi lter.
3. Remove the Sensor fi lter.
4. If it is very dirty, wash it with water and dry
Dust sensor it thoroughly.
fi lter
1. Add a small amount of kitchen detergent
to water and soak for about 10 minutes.
2. Rinse off the kitchen detergent with clean
water.
3. Completely dry the fi lter in a well-
ventilated area.
E-12
8/3/2558 BE 2:19 PM 8/3/2558 BE 2:19 PM