Table of Contents
Advertisement
Touch the "End
" field.
y
1.
The end time is displayed.
Using the rotary selector, set a later end time.
2.
Confirm with the Start/Stop button.
3.
The oven is on standby. The operation starts at the
appropriate time. You can see the cooking time
counting down in the status bar.
The cooking time has elapsed
A signal sounds. The oven stops heating. "Finished"
appears in the status bar. You can cancel the audible
signal early using the
0
Correcting the end time
This is possible if the oven is in standby. Use the
button to open the time-setting options menu, touch
"End
y
" and use the rotary selector to correct the end
time. Press the
button to close the menu.
0
Cancelling the end time
This is possible if the oven is on standby. To do so,
open the time-setting options menu using the
Touch "End
" and reset the End time using the rotary
y
selector. The cooking time immediately starts to count
down.
button.
0
AChildproof lock
Your appliance is equipped with a childproof lock so
C h i l d p r o o f l o c k
that children cannot switch it on accidentally or change
any settings.
Activating and deactivating
You can activate and deactivate the childproof lock
when the appliance is switched on or off.
In each case, press the
seconds. A confirmation note appears in the display
and the
/
The appliance door is locked
In the basic settings, you can change the settings so
that the appliance door is also locked in addition to the
control panel.
The appliance door locks if the temperature in the
cooking compartment reaches approx. 50 °C. The
symbol is displayed in the status bar. When the oven is
switched off, the appliance door locks immediately if the
childproof lock has been activated.
QBasic settings
There are various settings available to you in order to
B a s i c s e t t i n g s
help use your appliance effectively and simply. You can
change these settings as required.
Changing settings
Press the menu button.
1.
The operating modes menu opens.
0
Select the "Settings" operating mode.
2.
The first basic setting appears.
Use the rotary selector to change the values.
3.
Touch the
4.
settings.
Press the menu button to save.
5.
"Save" or "Discard" appears on the display.
button.
List of settings
This list tells you all the basic settings and how to
change them. Depending on the model of the appliance
you own, the display will show only those settings that
apply to your appliance.
You can change the following settings:
Setting
Select language
Time of day
Date
Childproof lock
button for approx. 4
/
symbol appears in the status bar.
arrow to switch to the next basic
Æ
Options
Additional languages possible
Sets the current time
Sets the current date
en
H
15
Advertisement
Table of Contents
