Remote Alarm Terminal - Panasonic MDF-DU900V Operating Instructions Manual

Remote alarm terminal

The alarm of this unit can be informed at a remote location from this unit by connecting the external alarm
device to the remote alarm terminals. For the type and behavior of remote alarm output, refer to page 47
～48.
The terminal of the remote alarm is installed at the
right side of the unit (See the figure on the point).
The alarm is outputted from this terminal. Contact
capacity is DC 30 V, 2 A.
When Buzzer key is pressed, the behavior of the
remote alarm is showed in Table.1.
Note: In the door alarm, the remote alarm does not
work. Refer to page 47.
Table 1 The behavior of the remote alarm when pressing Buzzer key
Remote Alarm setting
(Refer to page 28～30)
ON:
Non-interlock with Buzzer key
OFF:
Interlock with Buzzer key
Connecting Normal
terminal condition
COM.-N.C. Close
COM.-N.O. Open
COM.-N.C. Close
COM.-N.O. Open
Remote alarm terminal
Abnormal condition
(Including in the cases of power outage and
of where the power plug is pulled out.)
When pressing Buzzer key
Open Open (Maintain in abnormality)
Close Close (Maintain in abnormality)
Open Close (Return to normal)
Close Open (Return to normal)
13