On-Screen Language Selection; Channel Setup; Programme Edit; Basic Operation - Sharp AQUOS LC-29LE440M Operation Manual

On-screen Language
Selection
1
Press MENU (unless you have already selected
when the set was fi rst switched on). Then press
c / d to select "OPTION", then press b or
ENTER.
OSD Language
OPTION TT Language
Aspect Ratio
Blue Screen
Key Lock
First Time Installation
Reset
Software Update(USB)
DivX Reg. Code
Deactivation
2
Press a / b to select "OSD Language", then
press c / d to select the desired language.
3
Press RETURN to exit the menu.

Channel Setup

Press MENU. Select "CHANNEL/ATV Manual Tuning",
then press d or ENTER.
Press a / b to select desired item, then press
c / d to setting.
AT V M a n u a l Tu n i n g
C u r re n t C H
C o l o r S ys t e m
S o u n d S ys t e m
F i n e -Tu n e
A FC
S e a rc h
Current CH: Set the channel number.
Color System: Select the color system. Color System
has already been preset to automatic. Do not change
anything here. Any changes can cause picture or
sound disruption.
Sound System: Select the sound system. The correct
sound system is already installed. Any changes can
cause sound disruption.
Fine-Tune: Adjust the frequency of the channel fi nely.
AFC: Automatic Fine Tuning.
Search: Press c to search down from the current
frequency, and press d to search up.
Press RETURN to exit the menu.
8
J3PI2101B_EN.indd 8 J3PI2101B_EN.indd 8
English
West
16:9
On
Off
3 +
N TS C
M
6 7 . 2 5 M H z
O n
Menu
MENU

Programme Edit

You can preset your favorite channel (Channel List).
Press MENU. Select "CHANNEL/Programme Edit",
then press d or ENTER.
P ro g ra m m e E d i t
1 A B C
2
3
4
5
6
7
8
9
1 0
D e l e t e Re n a m e M ove
E n t e r M e n u
ENTER MENU
Delete (red button): You can delete channel.
Rename (green button): You can input or change the
name of a channel on the cursor screen with a / b / c /
d , ENTER and Green buttons.
Move (yellow button): Press a / b to select the
position that you want to swap the channel with, then
press Yellow button.
Skip (blue button): mark will appear.

Basic Operation

Channel selection
With the Numbered buttons (0-9).
Example:
• No. 2: Press 2.
• No. 29: Press 2 and within 2 seconds, press 9.
• No. 929: Press 9, 2, 9 same as above.
Press P +/- to change up or down a channel. This
takes approx. 2 seconds. If the auto search only stored
5 stations, only these 5 will appear. Skipped channels
will not appear.
NOTE
• As TV CH is called up when you input and set the fi rst digit,
CH inputs of over two digits cannot be made with external
input.
Channel List
The Channel List shows a list of all receivable
programmes.
Press CH LIST to display the Channel List.
Press a / b then press ENTER to select the desired
channel.
Press CH LIST to display the selected channel.
NOTE
• To display the programmes on the channel list, it is
necessary to input the programme name in "Programme
Edit" mode.
AT V
AT V
AT V
AT V
AT V
AT V
AT V
AT V
AT V
AT V
S k i p
5/27/2013 1:57:22 PM 5/27/2013 1:57:22 PM