System Settings - Samsung BD-J4500R User Manual

Digital Output Selection
Setup PCM
HDMI
Connection
Receiver
PCM Up to 7.1ch
Dolby Digital PCM 2ch
Dolby Digital
PCM 2ch
Plus
Audio
Stream on Dolby TrueHD PCM 2ch
Blu-ray
DTS PCM 2ch
Disc
DTS-HD High
PCM 2ch
Resolution Audio
DTS-HD Master
PCM 2ch
Audio
PCM PCM 2ch
Audio
Stream on Dolby Digital PCM 2ch
DVD
DTS PCM 2ch
Decodes
main feature
audio and
Definition BONUSVIEW
for Blu-ray Any audio stream
Disc together into
PCM audio and
add Navigation
Sound Effects.
* If Source Stream is 2ch, "Re-encoded Dolby D" Settings are not applied.
Blu-ray Discs may include three audio streams :
- Main Feature Audio : The audio soundtrack of the main feature.
- BONUSVIEW audio : An additional soundtrack such as the director or actor's commentary.
- Navigation Sound Effects : When you choose a menu navigation selection, a Navigation
Sound Effect may sound. Navigation Sound Effects are different on each Blu-ray Disc.
Bitstream Bitstream
(Unprocessed) (Re-encoded DTS) (Re-encoded Dolby D)
HDMI Receiver HDMI Receiver
PCM Re-encoded DTS Re-encoded Dolby Digital *
Dolby Digital Re-encoded DTS Re-encoded Dolby Digital *
Dolby Digital Plus Re-encoded DTS Re-encoded Dolby Digital *
Dolby TrueHD Re-encoded DTS Re-encoded Dolby Digital *
DTS Re-encoded DTS Re-encoded Dolby Digital *
DTS-HD High
Re-encoded DTS Re-encoded Dolby Digital *
Resolution Audio
DTS-HD Master
Re-encoded DTS Re-encoded Dolby Digital *
Audio
PCM 2ch PCM 2ch
Dolby Digital Dolby Digital
DTS DTS
Outputs only main Decodes main
feature audio feature audio and
Decodes main feature audio
stream so that your BONUSVIEW audio
and BONUSVIEW audio
AV receiver can stream together into
stream together into PCM
decode the audio PCM audio and add
audio and add Navigation
bitstream. Navigation Sound
Sound Effects, then re-
You will not hear Effects, then re-
encodes the PCM audio into
BONUSVIEW audio encodes the PCM
Dolby Digital bitstream
and Navigation audio into DTS
Sound Effects. bitstream
✎
NOTES
 Be sure to select the correct Digital Output
Bitstream or you will hear no sound or just loud noise.
 If the HDMI device (AV receiver, TV) is not
HDMI supported AV compatible with compressed formats (Dolby
receiver Digital, DTS), the audio signal outputs as
PCM.
 Regular DVDs do not have BONUSVIEW
audio and Navigation Sound Effects.
 Some Blu-ray Discs do not have BONUSVIEW
audio and Navigation Sound Effects.
 If you play MPEG audio soundtracks, the
audio signal outputs as PCM regardless
of your Digital Output selections (PCM or
Bitstream).
 If your TV is not compatible with compressed
multi-channel formats (Dolby Digital, DTS),
the player may output PCM 2ch downmixed
PCM 2ch
audio even though you selected Bitstream
Dolby Digital
(either Re-encoded or Unprocessed) in the
DTS
setup menu.
 If your TV is not compatible with PCM
sampling rates over 48kHz, the player may
output 48kHz downsampled PCM audio.
Dynamic Range Control
Lets you apply dynamic range control to
Dolby Digital, Dolby Digital Plus, and Dolby
TrueHD audio.
• Auto : Automatically controls the dynamic
range of Dolby TrueHD audio, based
on information in the Dolby TrueHD
soundtrack.
Also turns dynamic range control on for
Dolby Digital and Dolby Digital Plus.
• Off : Leaves the dynamic range
uncompressed, letting you hear the original
sound.
• On : Turns dynamic range control on for
all three Dolby formats. Quieter sounds
are made louder and the volume of loud
sounds is reduced.
Downmixing Mode
Lets you select the multi-channel downmix
method that is compatible with your stereo
system. You can choose to have the player
downmix to normal stereo or to surround
compatible stereo.

System Settings

Setup
By using the Setup function, you can set the
language, etc.
For more information about the Setup
function, refer to the setup section of this user
manual (See page 9).
Quick Start
You can turn on the power quickly by
decreasing the boot time.
✎
NOTES
 If this function is set to On, Standby power
consumption will be increased.
11