Input Signal; Color; Tint; Input Level - JVC dla-rs600 Instruction Manual

Color

For adjusting the color density of the video image.
Setting range: -50 (lighter) to +50 (deeper)
0
* Adjustment cannot be made when "Color Profile" is set to "x.v.Color".

Tint

For adjusting the hue of the video image.
Setting range: -50 (reddish) to +50 (greenish)
0
* Adjustment cannot be made when "Color Profile" is set to "x.v.Color".

Input Signal

Input Level

For setting the dynamic range (gradation) of the video input.
If the image is not displayed properly even after selecting "Auto", select an appropriate setting.
If the dynamic range is not appropriate, the bright areas become overexposed, and the dark areas become
0
underexposed.
Setting
Auto
Standard
Enhanced
Super White
* When Picture Mode is set to "THX", the setting is fixed at "Super White".

Color Space

For setting the color space of the input signal.
If the image is not displayed properly even after selecting "Auto", select an appropriate setting.
Setting
Auto
YCbCr (4:4:4)
YCbCr (4:2:2)
RGB
46
Sets the input signal level automatically.
Select this setting if you are inputting video signals (dynamic range: 16 - 235).
Select this setting if you are inputting PC signals (dynamic range: 0 - 255).
Select this setting when inputting Super White-compatible device signals (dynamic
range: 16 - 255).
Detects "YCbCr (4:4:4)", "YCbCr (4:2:2)", and "RGB" automatically.
Select this setting when inputting YCbCr (4:4:4) video signals.
Select this setting when inputting YCbCr (4:2:2) video signals.
Select this setting when inputting RGB video signals.
Description
Description