Related Manuals for Solidtronic RT-RoIP2-Zello
Summary of Contents for Solidtronic RT-RoIP2-Zello
- Page 1 RT-RoIP2-Zello User’s Guide Radio Over IP Network Gateway RT-RoIP2-Zello User’s Guide Copyright © 1999-2015, Innotek Company Limited. All Right Reserved.
-
Page 2: Important Notice
Thank you for purchasing RT-RoIP2 Radio-Over-IP Network Gateway. Please read this User’s Guide carefully before putting RT-RoIP2 into operation. Support for the RT-RoIP2 is available by email. Please direct all questions via email to support@solidtronic.com. Your question(s) will be answered promptly. Electrical shock hazard Never attempt to connect the unit to any power network other than one for which it was intended. -
Page 3: Key Features
2-way radio users, or bridge 2-ways radio systems across sites. The RT-RoIP2-Zello is equipped with the Intelligent Digital Audio Tracking System(iDats), the Android 4.0.3 OS with party communication app Zello, and powered by an ARM CPU, brings you the fast and stable push-to-talk... -
Page 4: Product Descriptions
RT-RoIP2-Zello User’s Guide Product Descriptions Packing List RT-RoIP2-Zello Radio Over IP Network Gateway x 1 Ethernet Connection Cable x 1 Radio Unit Connection Cable x 1 This User's Guide x 1 Major Operating Controls, Terminals and Their Functions 1. LCD This is a 4.3 inch touch screen LCD for displaying and on screen controlling the system. -
Page 5: Mode Selection Switch
RT-RoIP2-Zello User’s Guide 4. Radio Unit Terminal This terminal is used to connect to a radio unit. 5. Mode Selection Switch DIP SW1 : Radio Unit PTT Control Mode Selection. OFF for PTT Mode 1. ON for PTT Mode 2. -
Page 6: Installation
RT-RoIP2-Zello User’s Guide Installation Simple System Connection Diagrams Note: The connected Radio Units MUST be connected with external antennas to reduce the TX RF signal affect to the system equipment. Copyright © 1999-2015, Innotek Company Limited. All Right Reserved. -
Page 7: System Setup
RT-RoIP2-Zello User’s Guide System Setup Connect the Radio Unit to an external antenna. Connect the RT-RoIP2 to a Radio Unit by using the bundled connection cable. Connect the RT-RoIP2 to an IP network by using the Ethernet cable. Turn on the Radio Unit and adjust its volume to approximate 1/3 position of maximum level. -
Page 8: Operation
RT-RoIP2-Zello User’s Guide Operation When the system is installed, the Radio Unit and the apps are configured, the system is ready to use now. Zello Gateway and Link System Run Zello app Add contact(s) or channel(s) Press a contact or a channel for standing by calls.
Need help?
Do you have a question about the RT-RoIP2-Zello and is the answer not in the manual?
Questions and answers