Epson SF-510 User Manual page 27

Measurement screen
Button
Short press
A
Long press (two seconds
or more)
Short press
B
Long press (two seconds
or more)
Short press
C
Long press (two seconds
or more)
Short press
D
Long press (two seconds
or more)
* When you reset the display, it returns to the status before measuring started allowing you to start the next measurement.
Data that has been measured up to that point is stored in the product's memory.
Settings screen (Settings menu/Measure set. menu)
Setting up your SF-510/SF-710
You can display up to four Measurement screens and switch the screens using
this button.
Displays the Time screen.
Not available while measuring.
Turns the light on or off. The light turns on for approximately 10 seconds.
Displays the Measure set. menu.
Not available while measuring.
Starts, stops, or resumes measuring.
Displays the Time screen.
Displays the Time screen if you use reset* while measuring is stopped.
Not available while measuring.
Records laps while measuring.
Resets* while measuring is stopped.
Not available while measuring.
26
Description