Dvb-Via-Ip Server Selection; Note - Panasonic TX-32CS600E E-Manual

DVB-via-IP Server Selection

■
Preparations
Ensure the network connections and network settings are completed.
●
Functions > DVB-via-IP > DVB-via-IP client connection
Network > Network settings
Ensure the server settings are completed. For details, read the manual of
●
DVB-via-IP server.
■
DVB-via-IP Server Selection
1. Display the menu with MENU.
2. Select Setup > Tuning Menu
3. Select DVB-via-IP
4. Select Start Auto Setup
5. Select a server from
6. Select Client Settings
1) Select Unicast Environment
set.
Select Unicast Environment
●
Select Multicast Environment
●
hotel, hospital, etc. (All servers are selected automatically.)
2) Select Server List
7. Select Search Channels
8. Select a search mode and press
9. Set DVB-via-IP Search Mode
are made automatically.)
Set DVB-via-IP Satellite Configuration
●
Set DVB-via-IP Cable Configuration
●
When the operation is completed, the channel at the lowest position will
●
be displayed.

= Note =

If tuning has not been done completely, set
●
Watching > Tuning and editing channels > Manual Tuning
Depending on the network condition and broadcast, this function may not
●
be available.
> Add TV Signal
and press OK to access.
and press OK to access.
Server List and press
and press OK to access.
/ Multicast Environment
to use in a home network.
to use in multi family housing units,
and press OK to access.
and press OK
OK to access.
and press
- 170 -
and press OK
OK to set.
and press
to access.
OK to start Auto Setup. (Settings
to tune DVB-S channels.
to tune DVB-C channels.
Manual Tuning.
to access.
OK to