Cleaning And Care; Emptying The Condensed Water Container - Miele TMV 840 WP Operating Instructions Manual

Hide thumbs Also See for TMV 840 WP:
Table of Contents

Advertisement

Emptying the condensed water
container
The condensed water is collected in
the condensed water container.
Empty the condensed water
container after every drying
programme.
Empty the container will light up if the
maximum level of the condensed water
container is reached.
To delete Empty the container: open
and close the door with the dryer
switched on.
To prevent damaging the door
and the front of the condensed water
container when pulling the container
out of the dryer:
Always close the door completely*.
* This does not apply to right-hand
hinged models.
 Pull out the condensed water
container.
 Hold it at the front and towards the
back and keep it in a horizontal
position when carrying it.

Cleaning and care

 Empty the container.
 Replace the container in the dryer.
Condensed water should not be
consumed. It could lead to health
problems for people and animals.
The condensed water can be used for
the Steam smoothing programme. The
condensed water container must be
filled to use this programme (see the
following section).
51

Advertisement

Table of Contents
loading

Table of Contents