Standard Signal Mode Table - Samsung S24E500C User Manual

- This product can be set to only one
resolution for each screen size to obtain
the optimum picture quality due to the
nature of the panel. Using a resolution
other than the specified resolution may
degrade the picture quality. To avoid
this, it is recommended that you select
the optimum resolution specified for
your product.
- Check the frequency when you exchange
a CDT monitor (connected to a PC) for
an LCD monitor. If the LCD monitor
does not support 85 Hz, change the
vertical frequency to 60 Hz using the CDT
monitor before you exchange it with the
LCD monitor.

Standard Signal Mode Table

Model Name
Synchronization Horizontal Frequency
Vertical Frequency
Resolution Optimum resolution
Maximum resolution
If a signal that belongs to the following standard signal modes is transmitted from your PC, the screen will automatically be adjusted. If the signal transmitted from the
PC does not belong to the standard signal modes, the screen may be blank even though the power LED turns on. In such a case, change the settings according to the
following table by referring to the graphics card user manual.
Resolution Horizontal Frequency
(kHz)
IBM, 720 x 400 31.469
MAC, 640 x 480 35.000
VESA, 640 x 480 31.469
VESA, 800 x 600
35.156
VESA, 800 x 600
37.879
VESA, 1024 x 768 48.363
VESA, 1024 x 768 56.476
VESA, 1280 x 720 45.000
VESA, 1280 x 800
49.702
VESA, 1280 x 1024
63.981
S24E500C / S27E500C
30 – 81 kHz
56 – 70 Hz
1920 x 1080 @ 60 Hz
1920 x 1080 @ 60 Hz
Vertical Frequency Pixel Clock
(Hz) (MHz)
70.087 28.322
66.667 30.240
59.940 25.175
56.250 36.000
60.317 40.000
60.004 65.000
70.069 75.000
60.000 74.250
59.810 83.500
60.020 108.000
Sync Polarity
(H/V)
-/+
-/-
-/-
+/+
+/+
-/-
-/-
+/+
-/+
+/+
70