Samsung HT-H4500K User Manual page 11

3. Straighten a supplied speaker wire and put in the
hole on the centre of Stand Base.
4. Connect the upper Speaker to the assembled
Stand.
5. Insert a screw clockwise into the hole on the rear
of the speaker using a screwdriver.
And then connect a speaker cable.
6. This is the appearance after the speaker is
installed.
Follow this steps to install other speaker.
Speaker Cable Connections
* HT-H4530K only - Front Speakers
* HT-H4550K only - Front/Surround Speakers
1. Match each speaker cable bundle to the correct speaker by matching the colour coded plug on each
bundle to the coloured sticker on the bottom of each speaker.
2. Connect the speaker wire plugs from each speaker to the back of the product by matching the colours of
the speaker plugs to the colours of the speaker jacks.
In case of HT-H4530K
Front Speaker (L)
Centre Speaker
Subwoofer
* Refer to page 5~6 for the speakers of HT-H4500K/HT-H4530HK/HT-H4550K.
HT-H4500K_30HK_30K_50K_ZN-ENG-0508.indd 11 HT-H4500K_30HK_30K_50K_ZN-ENG-0508.indd 11
3
5
Surround Speaker (L)
Surround Speaker (R)
SURROUND
SURROUND
SURROUND
SURROUND
11
- English
4
Speaker
Stand
6
Front Speaker (R)
2014-05-08 2014-05-08 11:35:32 11:35:32