Table of Contents
Advertisement
Rear Panel
1
2
3
4
5
Cooling fan
• The fan operates while the unit is powered on.
If you set the unit to the minimum volume, the
1
fan won't operate.
Secure a minimum 10 cm of clear space from
all sides of the fan when installing the product.
FM Antenna Terminals
1.
Connect the FM antenna (supplied) to the FM
Antenna jack.
2.
Slowly move the antenna wire until you find a
location where reception is good, then fasten
2
it to a wall or other rigid surface.
3.
If reception is poor, you may need to install
an outdoor antenna. To do so, connect an
outdoor FM antenna to FM antenna jack on
the rear of the system using a 75Ω coaxial
cable (not supplied).
AUX IN Terminals
1.
Use an Audio Cable (not supplied) to connect
AUX IN on the product to Audio Out on the
external analog output device.
• Be sure to match connector colors.
• If the external analog output device has only
3
one Audio Out jack, connect either left or right
terminal.
• Press the TUNER/AUX button to select the AUX .
• If no button actions for more than 8 hours in AUX
mode, the power will automatically turn off.
OPTICAL DIGITAL AUDIO IN JACKS
• Receives the audio signal from a video player
4
(DVD, TV).
HDMI OUT JACKS
• Outputs digital video and audio signals
5
simultaneously using an HDMI cable.
HDMI IN JACKS
• Receives digital video and audio signals
6
simultaneously using an HDMI cable.
LED Terminals for Speaker Beat Waving.
7
2.2 CH Speaker Terminals
1.
To achieve the correct sound quality, when
you connect the speakers, match the color
of the speaker plugs to the color of the
speaker jacks. See below.
8
• LEFT channel (marked
• RIGHT channel (marked
• Don't force the Purple SUBWOOFER
connector into the White or Red speaker jack.
POWER
9
• Insert only provided power cable.
ONLY FOR SERVICE
0
• This jack is just for testing, please don't use it.
COAXIAL IN JACK
!
• Receives the digital coaxial audio signal.
7
English
!
0
9
8
7
6
).
).
Advertisement
Table of Contents
