Sharp PN-Y556 Operation Manual page 41

Others
Function
VOLUME
MUTE
INFORMATION MODEL
SERIAL NO
TEMPERATURE SENSOR
TEMPERATURE ACQUISITION
CAUSE OF LAST STANDBY MODE
TIPS
• Some menu setting items do not have a command. Set with the remote control during installation.
Controlling the Monitor with a computer (RS-232C)
Command Direction Parameter
VOLM WR 0-31
MUTE WR 0-1
INF1 R
SRNO R
DSTA R
ERRT R
STCA W 0
R
Reply Control/Response contents
0-31
0-1 0: OFF, 1: ON
Value
Value
0 Internal temperature normal
1 Internal temperature abnormal has occurred and the monitor is in standby mode
2 Internal temperature abnormal occurred (To delete the information of temperature
abnormal, turn off the main power.)
3 Internal temperature abnormal has occurred and backlight brightness is dimmed
4 Temperature sensor abnormal
Value Returns the temperature at the temperature sensors in the following format.
[Sensor 1]
Initialization
0 No detectable error has occurred
1 Standby mode by POWER button
3 Standby mode by RS-232C or LAN
4 Input signal waiting mode by No Signal
6 Standby mode by abnormal temperature
8 Standby mode by SCHEDULE setting
20 Standby mode by OFF IF NO OPERATION setting
*
○
-
○
41
E