Dcamera View Setting; Epause Time Settings - Sanyo VCC-9400 Instruction Manual

PRESET POSITION SETTINGS
On-screen title POSITION setting
1
Use the joystick lever (j or l) to move the cursor to
POSITION, and then use the joystick lever (d or c) to
select the display method (H or V). Then press the ENTER
button.
The following screen will appear.
ENTER
Note: Set preset positions can be checked by pressing the
numerical buttons and then the ENTER button on the
system controller while in normal viewing. The camera
will move to the preset position number that was
pressed.
•
Horizontally (H) position display
Change the POSITION setting to "H".
TITLE SETTING
ABCDEFGHIJKLN
NOPQRSTUVWXYZ
0123456789 :-
ID TITLE
CAM1 FLOOR-1
POSITION H ‚
PRESET NO. ON
PRESET OFF
MENU BACK
•
Vertically (V) position display
Change the POSITION setting to "V".
TITLE SETTING
ABCDEFGHIJKLN
NOPQRSTUVWXYZ
0123456789 :-
ID TITLE
CAM1 FLOOR-1
POSITION V ‚
PRESET NO. ON
PRESET OFF
MENU BACK
Note: To have the preset number displayed on normal viewing
screen, set PRESET NO. to "ON". If this field is set to "OFF",
the preset number will not be displayed on the screen.
Moving the on-screen title display position
2
Use the joystick lever (j l d c) to move the title
display to the preferred position on the screen.
English
1 CAM1 FLOOR-1
TITLE name
ID No.
Preset No.
1
CAM1
FLOOR-1
Preset No.
ID No.
TITLE name
1 CAM1 FLOOR-1
– 13 –
D CAMERA VIEW setting
Before making any setting change in this item, go to the VIEW
SETTING item of the CAMERA SETTINGS menu and establish up
to 9 patterns of camera settings. From among those 9 viewing
patterns, select the number of the most suitable pattern for each of
the preset surveillance locations.
Use the joystick lever (j or l) to move the
cursor to CAMERA VIEW, then use the joystick
lever (d or c) to select the value to a pattern
number.
Available settings: 0 – 8
E PAUSE TIME settings
Sets the duration time of image pausing when using sequential
automatic display (Sequential pan).
Use the joystick lever (j or l) to move the
cursor to PAUSE TIME, then use the joystick
lever (d or c) to select the value to a pattern
number.
Available settings: 3S, 5S, 10S, 15S, 20S, 30S, 45S, 60S, SKIP
SKIP: Ignores the designated preset position and continues
sequential pan operation.
Canceling a settings screen
To return to the normal screen, use the joystick lever (l c) to
select END for MENU, then press the ENTER button.
PRESET SETTING
PRESET NO. 3 ‚
DELETE SET ‚
TITLE OFF
CAMERA VIEW 1
PAUSE TIME 5S
PRESET SETTING
PRESET NO. 3 ‚
DELETE SET ‚
TITLE OFF
CAMERA VIEW 1
PAUSE TIME 5S