Samsung BD-J5900 User Manual page 15

Select the IP Setting field, and
3.
then press the v button.
Select Enter manually in the IP
4.
Setting field, and then press the
v button.
Select a parameter to enter (
5. Ip
Address, for example), and then
press the v button.
Use the number keypad on your
remote control to enter the numbers
for the parameter. Use the ◀▶
buttons on the remote control to
move from entry field to entry field
within a parameter. When done with
one parameter, press the v button.
Press the ▲ or ▼ button to move to
6.
another parameter, and then enter
the numbers for that parameter
following the instructions in Step 5.
Repeat Steps 5 and 6 until you
7.
have filled in all parameters.
✎
NOTE
You can get the Network parameters
■
from your Internet provider.
When finished entering all the
8.
parameters, press the RETURN or
ExIT button. The player verifies
the network connection, and then
connects to the network.
Wireless Network
You can setup a wireless network
connection in four ways:
-
Wireless Automatic
-
Wireless Manual
-
WPS(PBC)
-
WPS(PIN)
When you configure the wireless
network connection, any wireless
network devices currently connected
through the player or, if applicable,
the player's current wired connection,
will be disconnected.
Wireless - Automatic
Ğ
In the Home screen, select
1.
Settings, and then press the v
button.
Select Network, and then press
2.
the v button.
Select Network Settings, and then
3.
press the v button.
Select Wireless in the Network
4.
Settings screen, and then press
the v button. The player
searches for and then displays a
list of the available networks.
Network Settings
Select your network type.
Network type Wireless
Wireless network
Add Network you can connect your Blu-ray
player to the internet. please
select which wireless network
to use.
WpS(pBC) Search
m move " Select ' Return
Select the desired network, and
5.
then press the v button.
On the Security screen, enter your
6.
network's Security Code or Pass
Phrase.
Enter numbers directly using the
number buttons on your remote
control. Enter letters by selecting
a letter with an arrow button, and
then pressing v button.
When finished, select done and then
7.
press the v button. The player
verifies the network connection and
then connects to the network.
When verification is complete,
8.
select OK, and then press the v
button.
✎
NOTE
You should be able to find the
■
Security Code or Pass Phrase on
one of the set up screens you used
to set up your router or modem.
Wireless - manual
Ğ
If you have a static IP address or
the Automatic procedure does not
work, you'll need to set the Network
Settings values manually.
Follow the directions in Wireless -
1.
Automatic through Step 5.
The player tries to connect to the
2.
network, and then displays the
connection failed message.
On the bottom of the screen,
3.
select Ip Settings, and then press
the v button.
The IP Settings screen appears.
Select the IP Setting field, and
4.
then press the v button.
Select Enter manually in the IP
5.
Setting field, and then press the
v button.
S elect a parameter to enter (Ip
6.
Address, for example), and then
press v button. Use the number
keypad on your remote control to
enter the numbers for the parameter.
Use the ◀▶ buttons on the remote
control to move from entry field
to entry field within a parameter.
When done with one parameter,
press the v button.
Press the ▲ or ▼ button to move to
7.
another parameter, and then enter
the numbers for that parameter
following the instructions in Step 6.
Repeat Steps 6 and 7 until you
8.
have filled in all parameters.
✎
NOTE
You can get the Network parameters
■
from your Internet provider.
When finished, press the
9. RETURN
or ExIT button. The Security
Screen appears.
On the Security screen, enter your
11.
network's Security Code or Pass
Phrase. Enter numbers directly using
the number buttons on your remote
control. Enter letters by selecting a
letter with the ▲▼◀▶ buttons, and
then pressing the v button.
15