Table of Contents
Advertisement
Troubleshooting
If the camera fails to function as expected, check the list of common problems
below before consulting your retailer or Nikon-authorized service
representative.
Power, Display, Settings Issues
Problem
• Wait for recording to end.
• If the problem persists, turn the camera off.
The camera is on
but does not
respond.
The camera
cannot be
The battery is exhausted.
turned on.
• The camera automatically turns off to save power
The camera
• The camera and battery may not work properly at
turns off without
warning.
• The inside of the camera has become hot. Leave the
• The camera is off.
• The battery is exhausted.
• The camera automatically turns off to save power
• You cannot turn on both the monitor and viewfinder
The monitor or
viewfinder is
blank.
• The camera is connected to a TV or computer.
• Interval timer shooting or time-lapse movie shooting
• The camera and smart device are connected using
Cause/Solution
If the camera does not turn off, remove and reinsert
the battery or batteries or, if you are using an AC
adapter, disconnect and reconnect the AC adapter.
Note that although any data currently being
recorded will be lost, data that have already been
recorded will not be affected by removing or
disconnecting the power source.
(auto off function).
low temperatures.
camera off until the inside of the camera has cooled,
and then try turning it on again.
(auto off function).
at the same time. It may take a while to switch
between the monitor and viewfinder.
is in progress.
Wi-Fi connection and the camera is operated by
remote control.
A
–
10, 11,
F3
18
F3
–
14
16
18
–
–
E13,
E69
–
F7
- Quick Links:
- Charge the Battery
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Coolpix P900 and is the answer not in the manual?
Questions and answers
How to transfer photos from my CoolPix P900 to my computer
You can transfer photos from your Nikon Coolpix P900 to a computer using the following steps:
1. Connect the Camera: Plug the camera into the computer using a compatible USB cable (such as the UC-E21 USB cable).
2. Access the Photos: Once the camera is detected, open the file explorer on your computer and navigate to the camera's storage.
3. Copy the Photos: Right-click on the desired photos and select "Duplicate" or "Copy."
4. Save the Photos: Paste the copied photos into the desired folder on your computer.
Alternatively, you may transfer photos using Wi-Fi if your computer supports it.
This answer is automatically generated