Grundig RCD 1440 USB Instructions Manual page 13

CD­MODE
­ _ _______________________________________________________________
Playing­back­titles­in­random­order­
(Random)
1 In stop mode, keep pressing »MODE« until »RND«
appears in the display.
e
2 Press » II« to start random playback.
– A ll tracks on the CD are played back once in ran-
dom order.
3 To terminate the function, press »MODE« again.
Creating­a­track­memory
You can create a track memory of up to 20 tracks for
the current CD in any order you choose and then play
them back in that sequence. A track may be stored
more than once. Program is only possible in the stop
position.
Selecting­and­storing­tracks
1 Press »PROG/MEM« to call up the function.
2 Select the track by pressing »DOWN­ « or »UP­
3 Press »PROG/MEM« to save the track.
4 To store more tracks, repeat steps 2 to 3.
Playing­back­a­track­memory
1 Start the track memory by pressing »
– P layback begins with the first programmed file or
track.
2 Press »■/BAND« to end playback.
3 To play the track memory again, press
»PROG/MEM« and afterwards »
Changing­the­track­selection
1 In stop mode, keep pressing »PROG/MEM« until
the number of the track you want to replace appears
in the display.
2 Select the number of the new track by pressing
»DOWN­ « or »UP­
3 Press »PROG/MEM« to save the new track.
e
II«.
e
II«.
«.
Adding­tracks
1 In stop mode, press »PROG/MEM« until the preset
number shown in the display is zero.
2 Select the number of the new track by pressing
»DOWN­ « or »UP­
3 Press »PROG/MEM« to save the new track.
Deleting­the­track­memory
The device must be in the stop position.
1 Press »OPEN/CLOSE« to open the CD compart-
ment
or
press »■/BAND« while programming.
«.
«.
27­
ENGLISH