Panasonic BL-C20 Troubleshooting Manual page 8

Troubleshooting
Problem
Though the
camera is set to
wired
connection, the
router's wireless
indicator is on or
blinking.
The camera
cannot
communicate
with the wireless
terminal.
• The camera emits electrical waves about 5 minutes after the
power has been on, when set to wired connection.
Electrical waves will stop after about 5 minutes. Please wait.
• Radio waves may not be reaching the wireless terminal or
camera due to the distance between them, or the existence of
obstacles such as a concrete wall.
Adjust the position of the wireless terminal or camera.
Cause and Remedy
8