Sharp GX-T33 User Manual page 35

Tip
• When the cursor is placed after the first character,
the Candidate field displays characters most likely to
follow.
• If you want to use tone options,
long press P instead of step 2
to display the desired character.
The tone symbols are displayed
in the Candidate field.
The candidates are displayed.
Press the corresponding numeric
key (H).
34 Entering Characters
Using Stroke Mode
The following is an example of entering "
1.
Change the input mode to T9
Stroke mode.
Press IGJ to display the
2.
corresponding stroke for "
Long press M to complete the selection.
3.
".
".