Search By Motion - Mitsubishi Electric DX-TL4716E Installer Manual

Search (continued)

Search by Motion

You can search by motion in a specifi c area. For this function,
the camera number and start time need to be specifi ed. The
search result is displayed in frame still playback of the single
screen display.
User Menu
1 Search
6 Search by Motion
Motion Detection Settings
B
A + D
1. Set the camera number to be searched.
step
2. Set the time for start searching.
step
• To search from the oldest recording point, select
"Oldest."
• When the search start point is set to the earlier
time than the recording start point, the search is
executed from the oldest recording point.
3. Set the motion detection conditions for playback.
step
• Set motion mask setting, sensitivity, and motion
threshold.
these settings.
• The sensitivity of motion detection conditions for
playback has two setting items, "Low" and "High."
• The motion detection settings for recording
(Motion A or B) can be copied. To copy the
settings for recording, display the desired setting
in "Same as Recording Setting" and then select
"same."
The sensitivity setting for playback is set to
"High" when the setting for recording of "High,"
"Mid High," or "Mid" is copied, and is set to "Low"
when the setting for recording of "Mid Low" or
"Low" is copied.
4. Select "Search."
step
40
Motion Mask Setting
See page 56 for the details of
1, 2, 4
steps
3
step
User Menu