Panasonic KX-PRW130 Operating Instructions Manual page 50

Useful Information
Problem
The handset does not ring. R The ringer volume is turned off. Adjust ringer volume (page 14,
The base unit does not
ring.
I cannot make a call.
I cannot make long
distance calls.
Caller ID/Talking Caller ID
Problem
Caller information is not
displayed.
Caller information is
displayed or announced
late.
Caller information is not
announced.
The caller list/incoming
phone numbers are not
edited automatically.
I cannot dial the phone
number edited in the caller
list.
Time on the unit has
shifted.
50
Cause/solution
23).
R Silent mode is turned on. Turn it off (page 28).
R The ringer volume is turned off. Adjust ringer volume (page 14).
R The dialing mode may be set incorrectly. Change the setting
(page 13).
R Make sure that you have long distance service.
Cause/solution
R You must subscribe to a Caller ID service. Contact your
service provider/telephone company for details.
R If your unit is connected to any additional telephone equipment
such as a Caller ID box or cordless telephone line jack, plug
the unit directly into the wall jack.
R If you use a DSL/ADSL service, we recommend connecting a
DSL/ADSL filter between the base unit and the telephone line
jack. Contact your DSL/ADSL provider for details.
R The name display service may not be available in some areas.
Contact your service provider/telephone company for details.
R Other telephone equipment may be interfering with this unit.
Disconnect the other equipment and try again.
R Depending on your service provider/telephone company, the
unit may display or announce the caller's information at the
2nd ring or later.
R Move closer to the base unit.
R The handset or base unit's ringer volume is turned off. Adjust it
(page 14, 23).
R The Talking Caller ID feature is turned off. Turn it on (page 23).
R The number of rings for the answering system is set to "2
rings" or "Toll saver". Select a different setting (page 41).
R The Caller ID number auto edit feature is turned off. Turn it on
and try again (page 24).
R You need to call back the edited number to activate Caller ID
number auto edit.
R The phone number you dialed might have been edited
incorrectly (for example, the long distance "1" or the area code
is missing). Edit the phone number with another pattern
(page 35).
R Incorrect time information from incoming Caller ID changes the
time. Set the time adjustment to "Manual" (off) (page 23).
For assistance, please visit http://www.panasonic.com/help