Panasonic TH-L24XM6A Operating Instructions Manual page 16

[New Channel Message] (Digital TV)
Selects whether to give a notification message when a
new Digital TV channel is found.
New channels found!
Press OK to update channel list.
Press EXIT to ignore.
●
Selecting OK will perform [Update Channel List].
●
Sometimes, mainly during summer at night, the TV
may pickup distant TV stations outside your broadcast
due to favourable short term ionosphere conditions.
In such circumstances, the TV does not add any new
channel when you press OK. This is normal.
[Signal Condition] (Digital TV)
Select a channel and check its signal condition.
A good Signal Strength is not an indication of suitable
signal for Digital TV reception.
Use the Signal Quality indicator as follows.
●
Green bar: Good
●
Yellow bar: Poor
●
Red bar: Bad (Check the aerial)
Example:
Digital TV Signal Condition
Channel Name 101 DZFinfokanal
Signal Quality
0
Signal Strength 0
Network Name Wenvoe
Parameter [CH32]
These bars show the maximum signal value of the
selected channel.
[Add TV Signal]
Adds TV mode.
●
This function is available if you skip to tune any mode
in Auto Tuning during Initial Setup.
Setting [Child Lock]
You can lock specific channels / AV input terminals and
control who watches them.
When the locked channel / input is selected, a message
appears. Enter the PIN number to watch.
1
Enter the PIN number (4 digits)
Child Lock-PIN Entry
Please enter PIN for access
PIN *
●
"0000" has been stored as the default PIN number.
●
Enter the PIN number twice at first setting.
2
Select [Child Lock List]
Child Lock
Change PIN
Child Lock List
Parental Rating No Block
3
Select the channel / input to be locked
Child Lock List - TV and AV
Name Input
101 BBC 1 Wales Digital TV
7 BBC THREE Digital TV
14 E4C Digital TV
VCR Analogue TV
1 BBC1 Analogue TV
2 ***** Analogue TV
AV1 External
●
In Digital TV, additional lock item will appear.
[Freeview Players]: Applies access control for some
MHEG services.
16
10
10
562.00 MHz
(p. 7)
* * *
Type Lock
Digital TV
Digital TV
: Indicates
Digital TV
Analogue TV
locked input /
Analogue TV
Analogue TV channel
AV
■
[Lock all]: To lock all channels and inputs
■
[Next input]: To jump to the top of the next input
■
To change the PIN number
(1) Select [Change PIN]
Child Lock
Change PIN
(2) Enter a new PIN number twice
Write your PIN number here in
case you forget it.
■
To set Parental Rating
To watch the Digital TV programme that has rating
information over the selected age, enter the PIN number
(depending on the broadcaster).
Select [Parental Rating], then select the block setting
Child Lock
Parental Rating
No Block
Note
●
Setting [Shipping Condition] (p. 15) erases the PIN
number and all settings.
●
If you have forgotten your changed PIN, input "6969"
as the PIN number.
Performing [System Update]
To update automatically
Select [Auto Update Search in Standby]
System Update
Auto Update Search in Standby Off
System Update Search Now
●
Every time you set, the TV automatically performs
a search in Standby and downloads any available
update.
●
The automatic updating is performed when the TV is in
Standby (TV turned off with the remote control).
If System Update is performed, the software will be
updated (it may change TV functions).
If you do not want to do so, set [Auto Update
Search in Standby] to [Off].
To update immediately
1
Select [System Update Search Now]
System Update
Auto Update Search in Standby Off
System Update Search Now
2
Searches for an update (several minutes) and
displays a corresponding message, if any
3
Download
Note
●
Download may take more than 60 minutes.
●
During software download and update, DO NOT switch
off the TV.
●
The notification message might be a reminder. In this
case, the schedule information (the date that the new
version can be used) will appear. You can set the
reservation for update. The update will not start when
the TV is off.