Beko WDA 105614 User Manual page 32

Maintenance and cleaning
CAUTION
A
¾ Temperature of the water inside the machine may rise up to 90 ºC. To avoid burning risk, cleaned the filter after
the water in the machine cools down.
2 Open the filter cap.
Press the tab on the filter cap downwards and pull the piece out towards yourself.
6.6.2 To discharge the water:
a Pull the emergency draining hose out from its seat
b Place a large container at the end of the hose. Drain the water into the container by pulling out the plug at the end of the hose. When the
container is full, block the inlet of the hose by replacing the plug. After the container is emptied, repeat the above procedure to drain the
water in the machine completely.
c When draining of water is finished, close the end by the plug again and fix the hose in its place.
d Turn the pump filter to take it out.
32 / EN
Washer-Dryer