Connecting The Fm Antenna - Samsung HT-D5100K User Manual

Wireless Network
You can connect the home theater to your network through a wireless IP sharer (router).
1. A wireless AP/IP router is required to make a wireless network connection. Connect the wireless
LAN adapter to the Wireless LAN Adapter on the rear panel of the product.
2. Set the network options. (See page 37)
Broadband
service
Wireless IP sharer
PC
Networking with PC for
AllShare function
(See page 67)
✎
NOTE
This product is compatible with only Samsung's Wireless LAN Adapter(not supplied). (Model name:
WIS09ABGN).
You must use a wireless IP sharer that supports IEEE 802.11 a/b/g/n. (n is recommended for stable operation of
the wireless network.)
Wireless LAN, by its nature, may cause interference, depending on the use condition (router performance,
distance, obstacles, interference by other radio devices, etc).
Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.
The home theater supports the following security protocols only:
1) Authentication Mode : WEP, WPAPSK, WPA2PSK
2) Encryption Type : WEP, AES
For the AllShare function, a PC must be connected in the network as shown in the fi gure.
FM Antenna (supplied)
FM ANT
WIRELESS WIRELESS

Connecting the fm antenna

1. Connect the FM antenna supplied to the FM
ANTENNA Jack.
2. Slowly move the antenna wire around until you
fi nd a location where reception is good, then
fasten it to a wall or other rigid surface.
✎
NOTE
This product does not receive AM broadcasts.
LAN LAN
DIGITAL DIGITAL
AUDIO IN AUDIO IN
OPTICAL OPTICAL
WIRELESS LAN
Wireless LAN Adapter
(not supplied)
English
HDMI OUT HDMI OUT