Hitachi R-N40WS Use And Care Instructions Manual page 13

Odor or dust might prevail when the ice tray is not in use for more than a week or
when just starting to use the ice tray. Please clean the water piping or ice tray.
1 Refresh the water in water tank and set it properly.
2
Empty the water storage corner inside the freezer and lay a clean
tablecloth or towel at the bottom.
3 Upon confirming that the freezer door is closed, press and hold ice-
making button for more than five seconds. Alarm will beep and the
cleaning process begins.
Alarm keeps beeping during cleaning process.
4 Cleaning process completes in approximately three minutes.
Alarm stops beeping when cleaning process is completed.
5
Remove the ice or water left in side the water storage corner and
tablecloth or towel.
CAUTION
• Do not open freezer door once the button is pressed until the completion of
cleaning process.
• Water might not drain if ice making paused or ice making stopped were in
use. Set to automatic ice making and try resume cleaning after 30 minutes.
!"#$%&'()*"#+$,-./01234%56,789
!"#$ %&'()*+,-)".
1
!"#$%&'()*+,-./012345
2
!"#$%&'()*$+,=R=
3
!"#$%&'()*F
E
!"#$=P=
4
!"#$%&'(F
E
5
!"#$%&'()*+,-./*0
!"#$ %&'()*+,$-./ 0123
•
!"#$%
•
!"
USING THE ICE TRAY CLEANING FUNCTION
!"#$%&'(
!"#$%&'(()*+,-./01234!
!"#
#$&'()*+,-./012345678
:;<=>?
9-*:;=PM= !"#$
13