Table of Contents
Advertisement
Network settings
Network host name
DHCP
IP address
Subnet mask
Default gateway
Login user name
Login password
• DHCP – Choose to enable or disable the DHCP function. If
enabled, the display will be assigned IP address, Subnet mask and
Default gateway automatically. If disabled, you will be prompted
to enter the following values manually. When finished, press [SET]
button to store and save the chosen values.
• IP address
• Subnet mask
• Default gateway
• Login user name (The default user name is {admin})
• Login password (The default password is {0000})
Configuration reset
Reset all settings in Configuration1 menu to the factory preset values.
Factory reset
Reset all settings in the OSD menus of {Picture}, {Screen}, {Audio}, {PIP},
{Configuration1}, {Configuration2}, and {Advanced option} to the
factory preset values.
Press [ ] or [ ] button to select [Reset], and then press [SET] button
to do the reset.
Factory reset
Cancel
4.2.6. Configuration2 menu
OSD turn off
Picture
Information OSD
Screen
Off timer
OSD H-position
Audio
OSD V-position
PIP
Monitor information
OSD rotation
Configuration1
Logo
Configuration2
Advanced option
9
0
Z
L
Disable
172
-
16
-
0
-
1
255
-
0
-
0
255
-
0
-
0
-
0
-
0
a d m i n
0
0
0
0
[ SET ]
change [SET] in STORE
Reset
OSD turn off
Set the period of time the OSD (on-screen display) menu stays on the
screen.
The options are: {5 ~ 120} seconds.
Information OSD
Set the period of time the information OSD is displayed on the upper
right corner of the screen. The information OSD will display when input
signal is changed.
The information OSD will remain on the screen with {Off} selection.
The options are: {1 ~ 60} seconds.
Off Timer
Set the display to turn itself off to standby mode within an amount of
time specified.
The options are: {Off, 1 ~ 24} hours from currrent time.
NOTE:
When the "Off timer" is activated, the "Schedule" settings will
be disabled.
OSD H-position
Adjust the horizontal position of the OSD menu.
OSD V-position
Adjust the vertical position of the OSD menu.
Monitor information
Shows information about your display, including model number, serial
number, operating hours and software version.
Monitor information
OSD rotation
Rotate the OSD Menu.
The options are:
• {Landscape} (Default)
• {Portrait}
Logo
Choose to display the logo when you switch on.
The options are:
• {On} (Default)
• {Off}
19
Model name:
BDL4256ET
Serial no:
Operation hours:
0 H
3M
SW Version:
VER 0.204
BDL4256ET
Advertisement
Table of Contents
Troubleshooting
