Download
Share
Print this page
Bounty Hunter Discovery 3300 Owner's Manual
  1. Manuals
  2. Brands
  3. Bounty Hunter Manuals
  4. Metal Detector
  5. DISCOVERY 3300
  6. Owner's manual

Bounty Hunter Discovery 3300 Owner's Manual

Hide thumbs Also See for Discovery 3300:

Advertisement

Quick Links

MDISC33-2014.qx_MDISC33-2014 12/30/14 12:44 PM Page 2
MDISC33
Rev.4
123014
OWNER'S M NU L
The
Discovery 3300
is a professional metal
detector. While the most
difficult aspects of metal detecting
have
been
automated,
it
sophisticated electronic device which
requires an understanding of some basic
features and metal detecting concepts.
If you do not have prior experience with a
metal detector, we strongly recommend that you:
1) Adjust the Sensitivity to a low setting in the
event of false signals. Always begin use at a
reduced sensitivity level; use at full sensitivity
after you have become familiar with the detector.
2) Do not use indoors. This detector is for outdoor use only. Many
household appliances emit electromagnetic energy, which can
interfere with the detector. If conducting an indoor demonstration,
turn the sensitivity down and keep the searchcoil away from
appliances such as computers, televisions and microwave ovens.
If your detector beeps erratically, turn off appliances and lights,
especially those with dimmer switches.
Also keep the searchcoil away from objects containing metal, such
as floors and walls.
3) Read this manual. Most importantly, review the Quick-Start Demo
(p.7-8) and Basic Operation (p. 9-12).
4) Use 9-volt ALKALINE batteries only. Do not use Heavy Duty Batteries.
is
a

Advertisement

loading
Need help?

Need help?

Do you have a question about the Discovery 3300 and is the answer not in the manual?

Questions and answers

Related Manuals for Bounty Hunter Discovery 3300

Summary of Contents for Bounty Hunter Discovery 3300

  • Page 1 MDISC33-2014.qx_MDISC33-2014 12/30/14 12:44 PM Page 2 OWNER’S M NU L Discovery 3300 is a professional metal detector. While the most difficult aspects of metal detecting have been automated, sophisticated electronic device which requires an understanding of some basic features and metal detecting concepts.

  • Page 2: Table Of Contents

    FREE DETECTOR. The Discovery 3300 metal detector is warranted against defects in materials and All Metal ......10 workmanship under normal use for five years from the date of purchase to the original owner.

  • Page 3: Terminology

    Detector sounds con- • Detector needs to be • Press Pinpoint and only sound a tone when a metal object is detected. The tinuous tone with retuned • Re-ground balance Discovery 3300 incorporates proprietary Super-Scan™ circuitry to coil over ground eliminate false signals from severe ground conditions...

  • Page 4: Assembly

    MDISC33-2014.qx_MDISC33-2014 12/30/14 12:44 PM Page 8 IN THE FIELD TECHNIQUES - Pinpoint Mode SSEMBLY Assembly is easy and requires no tools. As your search takes you to different areas, verify the ground balance setting peri- odically using the above procedure. Within a geographical area, ground condi- Position detector upright.
  • Page 5 MDISC33-2014.qx_MDISC33-2014 12/30/14 12:44 PM Page 10 SSEMBLY IN THE FIELD TECHNIQUES - Pinpoint Mode Adjusting the Armrest GROUND B L NCING Most people will find the standard position of Before using the PINPOINT Mode, it is necessary to ‘Ground Balance” your the armrest very comfortable.

  • Page 6: Batteries

    MDISC33-2014.qx_MDISC33-2014 12/30/14 12:44 PM Page 12 IN THE FIELD TECHNIQUES (motion modes only) B TTERIES You may encounter some false coil’s narrower detection field Use ALKALINE batteries only. signals as you proceed. False can better distinguish between signals occur when the detector two objects in close proximity.

  • Page 7: Quick-Start Demo

    MDISC33-2014.qx_MDISC33-2014 12/30/14 12:44 PM Page 14 IN THE FIELD TECHNIQUES (motion modes only) Q UICK-ST RT DEMONSTR TION Swing the searchcoil slowly, to verify the repeatability of the I. Supplies Needed overlapping each sweep as you signal, and the potential of the •...

  • Page 8: All Metal

    MDISC33-2014.qx_MDISC33-2014 12/30/14 12:44 PM Page 16 Q UICK-ST RT DEMONSTR TION IN THE FIELD TECHNIQUES (motion modes only) VI. Wave the Nail over the Searchcoil PINPOINTING IN MOTION MODES COIL MOVEMENT a. The Nail will not be detected. b. The Nail has been "Discriminated Out." When swinging the coil, be Accurate pinpointing takes practice VII.
  • Page 9 A secondary use for the Sensitivity Control is to reduce false detection Modes, the coil must be in continuous motion. It is often useful to signals caused by severe ground conditions. While your Discovery 3300 search for targets in a motion mode, and when identified, pinpoint contains circuitry to eliminate the signals caused by most naturally their location with the PINPOINT control.
  • Page 10 MDISC33-2014.qx_MDISC33-2014 12/30/14 12:44 PM Page 20 B SIC OPER TION DEPTH ND T RGET DISPL Y (motion modes only) DEPTH INDIC TOR: accurate readings, multiple targets, and LL MET L MODE (Default Operation) highly erratic readings which evidence The Depth Indicator is accurate for The detector defaults to ALL METAL Mode after powering on.
  • Page 11 MDISC33-2014.qx_MDISC33-2014 12/30/14 12:44 PM Page 22 B SIC OPER TION DEPTH ND T RGET DISPL Y (motion modes only) Please refer to the display on your such as a nail, or a more valuable disappear, thus returning to detection the objects which fall into the detector and reference the TARGET historic iron relic.
  • Page 12 MDISC33-2014.qx_MDISC33-2014 12/30/14 12:44 PM Page 24 B SIC OPER TION UDIO T RGET IDENTIFIC TION (motion modes only) 4) Press ZAP. An "R" appears under the segment to be eliminated. While the LCD (Liquid Crystal Display) is very accurate in identifying 5) Pass the searchcoil over the same object again.