Hitachi CP-WU5500 User Manual page 9

2.2 Installing the first projector (Set A) - Setting up Set A
4.
Display the menu with the MENU button.
menu function)
5.
Use the ▲/▼/◄/► buttons to go into the following menu.
ADVANCED MENU > OPTION
> SERVICE > COMMUNICATION
> STACK
STACK menu will appear on screen.
(Operating Guide
6.
Use the ▲/▼ buttons to highlight STACK
MODE, and press the ► button to display
the STACK MODE dialog.
Highlight SUB pressing the ▲/▼ buttons,
and press the ► button.
7.
After pressing the ► button, a dialog to
confirm whether or not to save the setting is
displayed.
Press the ► button to complete the setting. ( 24 )
NOTE • To avoid incorrect operations with the remote control, it is
recommended to operate with the control panel or a wired remote control.
KEY LOCK or REMOTE ID * function is also available.
• If STACK MODE is changed to MAIN or SUB, the setting of OPTION menu -
CONTROL TERMINAL - RS-232C is forcibly set to CONTROL.
* Available only in optional remote control.
→ OPTION menu)
(continued)
(Operating Guide
Installation
→ Using the
9