Panasonic Viera TX-L24E3B Operating Instructions Manual page 78

Message
New channels found!
Press OK to update channel list.
Press EXIT to ignore.
No channel found.
Please check aerial or local signal
availability.
Press OK to start Auto Setup.
No module inserted
No recording -
Already recording
No recording -
Check media
No recording - Playing
No recording - Unknown reason
No service
No signal
PIN incorrect!
Please check settings and
connections
on HDMI devices.
Please wait.
Recording this channel now
Reset to Factory Shipping
Condition Completed.
Please switch off TV.
Sending Preset Data
Software successfully updated.
Press EXIT to continue.
Software update failed. Please
try again later.
Press EXIT to continue.
This timer will not follow the TV
Guide information.
Press OK to continue, RETURN to
restore original timer.
Timer already expired !
Timer Event Due to Start
: has been
programmed for External
recording at :
Timer incorrect !
Timer overlap.
Press OK to keep, RETURN to
edit.
Tuner Locked
Press EXIT to unlock and stop
recording
Unable to download, please
check equipment
78
There may be new channels available.
This message will appear each time a change is made by the broadcasters. This
message can be deactivated by setting [New Channel Message] to Off in [DVB
Tuning Menu].
Selecting OK will perform [Update Channel List].
Follow the on screen instructions.
Please also refer to p. 75.
If channels are still not found, consult your local Panasonic dealer.
Check the CI module is inserted completely (p. 49).
The equipment may already be recording.
The tape or disc may be "write protected", full, missing or damaged.
The equipment may be playing the tape or disc.
The recording may not be performed. Check the equipment.
The broadcaster has stopped the service. Check the channel in the TV Guide. (p. 18)
The TV cannot detect the signal. Check the connection of the RF cable.
The PIN number you entered is wrong.
Communication error in VIERA Link function (p. 62).
A function is in progress.
The recorder is recording the programme from its own tuner. You can turn the TV
off and leave the equipment recording in the normal way.
[Auto Setup] will automatically start when Mains power On / Off switch is next
turned On. (p. 12)
Q-Link or VIERA Link channel download is in progress.
The software updating is finished.
Perform [System Update Search Now] in System Update (p. 50).
If this is still unsuccessful, there may not be any new software available.
If you edit the start time or end time of Guide link programming by more than
10 minutes, it will no longer be performed as Guide link programming. The
programming will be performed according to the time setting.
The starting time in Timer Programming has already passed. Set the timer correctly
(p. 42).
This message will appear 2 minutes before timer programming event for external
recording due to start.
Set the start and end times in Timer Programming correctly (p. 42).
Timer programming events are overlapped. Press the OK button to keep the
overlapped setting. [Ext Rec.] is given priority over [Reminder]. When two or
more [Ext Rec.] overlap, the first timer programming event starts and finishes as
programmed. The next timer programming event can then start.
If you want to unlock the tuner, cancel Direct TV Recording (p. 61, 63) or the
recording of Timer Programming (p. 42).
The tape or disc is active. Stop the equipment and try again.
Meaning / Action